htpInterfaceDefType

The horizontal tailplane is attached to two reinforced frames: at <htpFrame1UID> by its trim actuator (htpFwdInterfaceDefType), at <htpFrame2UID> by two bolts on its hinge line. The cut-out of the fuselage is sized to allow the trim range from <htpAlphaDown> to <htpAlphaUp>, and it is reinforced by crossbeams, diagonal beams and side beams (htpStructElemDefType).

<htpAreaToleranceX>, <htpAreaToleranceY> and <htpAreaToleranceZ> are tolerances for checking that the rear attachment of the tailplane fits the frame <htpFrame2UID>.

Attributes

Name	Type	Use	Description
`@externalDataDirectory`	`xsd:string`	optional	Directory of the external file the element was read from, as URI
`@externalDataNodePath`	`xsd:string`	optional	Path of the parent element in the merged dataset, at which the element was inserted from an external file
`@externalFileName`	`xsd:string`	optional	Name of the external file the element was read from
`@uID`	`xsd:ID`	required	UID

Child elements

Name	Type	OccurrenceHow often the element may appear at this place. The schema writes it as minOccurs and maxOccurs on the declaration.	Description
allThe children below may appear in any order. Each may appear at most once.
`htpFrame1UID`	`stringUIDBaseType`	[1..1] required	UID of the frame at the forward attachment (trim actuator)
`htpFrame2UID`	`stringUIDBaseType`	[1..1] required	UID of the frame at the rear attachment (hinge line)
`htpAlphaUp`	`doubleBaseType`	[1..1] required	Largest trim deflection, nose up [deg]
`htpAlphaDown`	`doubleBaseType`	[1..1] required	Largest trim deflection, nose down [deg]
`htpReinfAngle`	`doubleBaseType`	[1..1] required	Angle of the reinforcements at the rear attachment [deg]
`htpAreaToleranceX`	`doubleBaseType`	[0..1] optional	Tolerance on the x-position of the rear attachment around its frame [m]
`htpAreaToleranceY`	`doubleBaseType`	[0..1] optional	Tolerance on the y-position of the rear attachment around the outer edge of its frame [m]
`htpAreaToleranceZ`	`doubleBaseType`	[0..1] optional	Allowed z-position of the rear attachment relative to the height of its frame [-]
`htpStructuralElementDefinitions`	`htpStructElemDefType`	[1..1] required	Reinforcement of the cut-out
`htpForwardInterfaceDefinitions`	`htpFwdInterfaceDefType`	[1..1] required	Forward attachment (trim actuator)

htpInterfaceDefType

Attributes

Child elements

Used by

In a dataset · 2 paths

In the schema · 1 declaration