| element Element |
fuselageCutOutType
Namespace: Empty
Schema: Empty
Type
ParentsChildren| Name | Occurrences | Description |
|---|---|---|
 All | ||
 alignmentVector | [0, 1] | Coordinates of the unit vector defining the y-axis of the local cutout coordinate system. Must be normal to the orientationVector. |
| cutoutType | Cutout type. Determines the type of the cutout and how it is treated by the tools. Possible values: ("window"|"door"|"ramp") | |
| deltaY | This value is used to define the width of the cutout | |
| deltaY1 | [0, 1] | This value is used to define the width of the cutout |
| deltaZ | This value is used to define the height of the cutout | |
| deltaZ1 | [0, 1] | This value is used to define the height of the cutout |
| description | [0, 1] | Description of the cutout |
| filletRadius | Fillet radius of the cut element (absolute value) | |
| name | [0, 1] | Name of the cutout |
| orientationVector | Coordinates of the unit vector defining the direction of extrusion | |
| positionX | X position of the cutout center point | |
| referenceAngle | Angle in degrees of the vector pointing from the cutout reference point to the cutout center point, measured relative to the direction of the fuselage z axis. | |
| referenceY | Y offset of the cutout reference point | |
| referenceZ | Z offset of the cutout reference point |
Attributes| Name | Type | Required | Description |
|---|---|---|---|
 externalDataDirectory |  string | ||
| externalDataNodePath | string | ||
| externalFileName | string | ||
| uID | ID | Yes |
RemarksSee Also