| control Element |
Control parameters for retraction and extension
Namespace: Empty
Schema: Empty
Type
ParentsChildren| Name | Occurrences | Description |
|---|---|---|
 All | ||
 controlFunctions | [0, 1] | Control functions for retraction and extension |
| offset | [0, 1] | Distance of the center of rotation to the top of the main strut for retracting and extending the landing gear. I.e., a value of 0 means that the landing gear will rotate around the upper end of the main strut during retraction. If this value is greater than 0, the center of rotation is shifted by this value above the main strut end point (translation along the main strut axis). |
| retractAngle | [0, 1] | Retraction angle of the main landing gear. Equals a rotation around the global z-axis in degrees. 0 = retraction to the front; 90 = retraction to the left; 180 = retraction to the rear; 270 = retraction to the right. |
Attributes| Name | Type | Required | Description |
|---|---|---|---|
 externalDataDirectory |  string | Directory of the external data file | |
| externalDataNodePath | string | Path of the node inside the external data file | |
| externalFileName | string | Name of the external data file |
See Also