complexType · extension complexBaseType · all
Build-up of a wall
Describes how a wall (wallSegmentType) is built: its sheet, the reinforcements in its plane and the caps along its edges.
Edges
The longitudinal edges of a wall run along it, through its positions or along the skin; the lateral edges run across it at its positions. <innerLongitudinalCap> lies on the edge through the positions of a wall extruded in one direction; for a wall extruded in both directions, it lies on the edge at the skin opposite to the extrusion direction. <outerLongitudinalCap> lies on the edge at the skin in the extrusion direction. <lateralCaps> lie on the lateral edges at the positions selected by their placement (lateralCapType).
Reinforcements
<longitudinalReinforcements> run along the wall and <lateralReinforcements> across it, both in its plane; they are described like the stringers of a wing (wingStringerType). How the positions of that type are read on a wall is not specified yet.
| Name | Type | Constraints | Use | Default | Description |
|---|---|---|---|---|---|
@externalDataDirectory | xsd:string | optional | Directory of the external file the element was read from, as URI | ||
@externalDataNodePath | xsd:string | optional | Path of the parent element in the merged dataset, at which the element was inserted from an external file | ||
@externalFileName | xsd:string | optional | Name of the external file the element was read from | ||
@uID | xsd:ID | optional | UID |
| Name | Type | Constraints | OccurrenceHow often the element may appear at this place. The schema writes it as minOccurs and maxOccurs on the declaration. | Default | Description |
|---|---|---|---|---|---|
| allThe children below may appear in any order. Each may appear at most once. | |||||
sheetElementUID | stringBaseType | [1..1] required | UID of the sheetBasedStructuralElement of the wall | ||
longitudinalReinforcements | wingStringerType | [0..1] optional | Reinforcements along the wall, in its plane | ||
lateralReinforcements | wingStringerType | [0..1] optional | Reinforcements across the wall, in its plane | ||
innerLongitudinalCap | capType | [0..1] optional | Cap on the longitudinal edge through the positions (one-sided extrusion) or at the skin opposite to the extrusion direction (double-sided) | ||
outerLongitudinalCap | capType | [0..1] optional | Cap on the longitudinal edge at the skin in the extrusion direction | ||
lateralCaps | lateralCapType | [0..1] optional | Caps on the lateral edges at the positions | ||
| Type | Name |
|---|---|
structuralWallElementsType | structuralWallElement |