controlSurfaceBorderLeadingEdgeType

A border is a section of the wing through two points of the chord surface of the component segment: the leading edge point P_LE at <etaLE> and ξ = 0, i.e. on the leading edge of the wing, and the trailing edge point P_TE at <etaTE> and <xsiTE>. <etaTE> defaults to <etaLE>. The section plane contains both points and the normal of the component segment. The η and ξ coordinates refer to the parent of the control surface.

Where the rear side of the leading edge device meets the upper and the lower surface of the wing at different positions, <xsiTEUpper> and <xsiTELower> replace <xsiTE>; P_TE then lies at the larger of the two. <innerShape> describes the hollow rear side between these points (leadingEdgeHollowType), and <airfoil> replaces the section by an airfoil contour (contourReferenceType). All ξ values, including <xsiTEUpper> and <xsiTELower>, are relative chordwise coordinates of the component segment.

Sections at the inner borders of three control surfaces: (a) a flap whose rounded leading edge passes through the nose point at relHeightLE 0.5 and meets the skin at xsiUpperSkin 0.9 and xsiLowerSkin 0.7 of the flap chord from its trailing edge; (b) a slat whose hollow rear side runs from xsiTEUpper 0.15 over the point at xsiTE 0.04 and relHeightTE 0.45 to xsiTELower 0.12; (c) a spoiler between xsiLE 0.55 and xsiTE 0.69 with the lowest point of its leading edge at relHeightLE 0.8

The figure shows the sections at the inner borders of the flap, the slat and the spoiler of the example in controlSurfacesType, with the values that define their contours.

Attributes

Name	Type	Use	Description
`@externalDataDirectory`	`xsd:string`	optional	Directory of the external file the element was read from, as URI
`@externalDataNodePath`	`xsd:string`	optional	Path of the parent element in the merged dataset, at which the element was inserted from an external file
`@externalFileName`	`xsd:string`	optional	Name of the external file the element was read from

Child elements

Name	Type	OccurrenceHow often the element may appear at this place. The schema writes it as minOccurs and maxOccurs on the declaration.	Description
sequenceThe children below must appear in exactly this order. Each may repeat as often as its own occurrence allows.
`etaLE`	`etaIsoLineType`	[1..1] required	Spanwise position of the leading edge point
`etaTE`	`etaIsoLineType`	[0..1] optional	Spanwise position of the trailing edge point (default: etaLE)
choiceExactly one of the alternatives below may appear, unless the occurrence next to this line says otherwise.
`xsiTE`	`xsiIsoLineType`	[1..1] required	Chordwise position of the trailing edge point
sequenceThe children below must appear in exactly this order. Each may repeat as often as its own occurrence allows.
`xsiTEUpper`	`doubleBaseType`	[1..1] required	Chordwise position where the rear side meets the upper surface of the wing
`xsiTELower`	`doubleBaseType`	[1..1] required	Chordwise position where the rear side meets the lower surface of the wing
choiceExactly one of the alternatives below may appear, unless the occurrence next to this line says otherwise.
`innerShape`	`leadingEdgeHollowType`	[0..1] optional	Hollow rear side
`leadingEdgeShape`	`leadingEdgeShapeType`	[0..1] optional	Shape of the leading edge
`airfoil`	`contourReferenceType`	[0..1] optional	Airfoil contour of the border

Type	Name
`controlSurfaceOuterShapeLeadingEdgeType`	`innerBorder`
`controlSurfaceOuterShapeLeadingEdgeType`	`outerBorder`

controlSurfaceBorderLeadingEdgeType

Attributes

Child elements

Used by

In a dataset · 6 paths

In the schema · 2 declarations