alignmentCrossBeamType

Adjusts a cross beam or a strut against its path, e.g. to keep the end of a cross beam clear of the skin. The values refer to the profile coordinate system on the path: x along the path, y along the x-axis and z along the y-axis of the profile (crossBeamAssemblyPositionType, crossBeamStrutAssemblyPositionType). The path of a cross beam starts at its right end, that of a strut at the cross beam. <offset1LocX> shortens the member at the start of its path and <offset2LocX> at its end; a negative value lengthens it. The profile is first rotated about the x-axis by <rotationLocX> and then moved by <translationLocY> along y and by <translationLocZ> along z; a value that is not given is 0.

Example

The cross beams of the example end 30 mm short of the surface on both sides:

<alignment uID="Fuselage_paxCrossBeam1_alignment">
    <offset1LocX>0.03</offset1LocX>
    <offset2LocX>0.03</offset2LocX>
</alignment>

Cross beam shortened at both ends

Attributes

Name	Type	Use	Description
`@externalDataDirectory`	`xsd:string`	optional	Directory of the external file the element was read from, as URI
`@externalDataNodePath`	`xsd:string`	optional	Path of the parent element in the merged dataset, at which the element was inserted from an external file
`@externalFileName`	`xsd:string`	optional	Name of the external file the element was read from
`@uID`	`xsd:ID`	required	UID

Child elements

Name	Type	OccurrenceHow often the element may appear at this place. The schema writes it as minOccurs and maxOccurs on the declaration.	Description
allThe children below may appear in any order. Each may appear at most once.
`offset1LocX`	`doubleBaseType`	[0..1] optional	Length by which the member is shortened at the start of its path [m]
`offset2LocX`	`doubleBaseType`	[0..1] optional	Length by which the member is shortened at the end of its path [m]
`rotationLocX`	`doubleBaseType`	[0..1] optional	Rotation of the profile about the x-axis of the profile coordinate system, i.e. about the path [deg]
`translationLocY`	`doubleBaseType`	[0..1] optional	Offset of the profile along the y-axis of the profile coordinate system [m]
`translationLocZ`	`doubleBaseType`	[0..1] optional	Offset of the profile along the z-axis of the profile coordinate system [m]

alignmentCrossBeamType

Attributes

Child elements

Used by

In a dataset · 8 paths

In the schema · 2 declarations

Type	Name
`crossBeamAssemblyPositionType`	`alignment`
`crossBeamStrutAssemblyPositionType`	`alignment`