| landingGearControlType Complex Type |
Landing gear control parameters
Namespace: Empty
Schema: Empty
Base Type
UsagesChildren| Name | Occurrences | Description |
|---|---|---|
 All | ||
 controlFunctions | [0, 1] | Landing gear control functions |
| offset | [0, 1] | Distance of the center of rotation to the top of the main strut for retracting and extending the landing gear. I.e., a value of 0 means that the landing gear will rotate around the upper end of the main strut during retraction. If this value is greater than 0, the center of rotation is shifted by this value above the main strut end point (translation along the main strut axis). |
| retractAngle | [0, 1] | Retraction angle of the main landing gear. Equals a rotation around the global z-axis in degrees. 0 = retraction to the front; 90 = retraction to the left; 180 = retraction to the rear; 270 = retraction to the right. |
Attributes| Name | Type | Required | Description |
|---|---|---|---|
 externalDataDirectory |  string | ||
| externalDataNodePath | string | ||
| externalFileName | string |
Remarks