Click or drag to resize
wingFuselageAttachment Element

Definition of the wing-fuselage attachment

Namespace: Empty

Schema: Empty

Type
Parents
Children
NameOccurrencesDescription
All All
      Element actuators[0, 1]

Definition of actuators (e.g. trim actuator of an HTP) of the attachment.

      Element attachmentPins[0, 1]

Definition of position, orientation, materials and blocked DOFs of attachment pins.

      Element rib1

Definition of first (=inner) rib of the fuselage attachment.

      Element rib2[0, 1]

Definition of the second (=outer) rib of the fuselage attachment. Optional. Only to be used if attachment is defined over two ribs.

Attributes
NameTypeRequiredDescription
Attribute externalDataDirectorySimple Type string
Attribute externalDataNodePathSimple Type string
Attribute externalFileNameSimple Type string
Remarks

Definition of the wing-fuselage attachment. The area of the fuselage attachment (resp. center wing box, CWB) is defined by defining one resp. two ribs from the rib definition. If one rib is defined (rib1) the CWB goes from the closer end of the componentSegment (e.g. wing symmetry plane) to the defined rib. If two ribs are defined (rib1 and rib2), the CWB is between both ribs.

Additionally attachment pins can be defined. At those positions the wing is attached to the fuselage. This can be e.g. used for defining the wing-attachment of high wing configurations, HTPs or VTPs.

See Also