hinge Element |
Definition of a flap, lead-lag or pitch hinge.
Namespace: Empty
Schema: Empty
Name | Occurrences | Description |
---|---|---|
All | ||
damping | [0, 1] | Damping of the hinge in (N/(m/s)) for linear hinges and (N.m/(deg/s)) for angular hinges. Default value: +inf |
description | [0, 1] | Description of the hinge. |
dynamicStiffness | [0, 1] | Dynamic stiffness of the hinge in (N/m) for linear hinges and (N.m/deg) for angular hinges. Default value: +inf (statically rigid hinge) |
name | [0, 1] | Name of the hinge. |
neutralPosition | [0, 1] | The angle (in deg) at which the hinge is in neutral position. This element is normally used to define precone or prelag angles of the attached blade. Defaults to 0. |
staticStiffness | [0, 1] | Static stiffness of the hinge in (N/m) for linear hinges and (N.m/deg) for angular hinges. Default value: +inf (statically rigid hinge) |
transformation | Transformation | |
type | Hinge type. Possible values: "flap", "pitch" "leadLag". This is used to define the rotation axis of the hinge (flap = y-axis in blade cs, pitch = x-axis in blade cs, lead-lag = z-axis in blade cs). |
Name | Type | Required | Description |
---|---|---|---|
externalDataDirectory | string | ||
externalDataNodePath | string | ||
externalFileName | string | ||
uID | ID | Yes |