| structuralWallElement Element |
Structural wall reinforcement definition specifying physical properties of a fuselage wall segment.
Namespace: Empty
Schema: Empty
Type
ParentsChildren| Name | Occurrences | Description |
|---|---|---|
 All | ||
 innerLongitudinalCap | [0, 1] | Reinforcement at inner side of wall. This is either, depending on the extrusion direction flag, the edge of the wall that connects the positions ("positiveDirection") or the edge of the wall where the wall intersects with the fuselage skin in the opposite direction of the extrusion direction. |
| lateralCaps | [0, 1] | Lateral caps are the reinforcements of the wall at the edges lateral to the main direction of the wall. These caps can be either defined at start, end, start and end or at all wall positions according to the placement flag. |
| lateralReinforcements | [0, 1] | Reinforcements running in lateral/radial direction in the wall segment plane. |
| longitudinalReinforcements | [0, 1] | Reinforcements running along the position polygon of the wall positions. |
| outerLongitudinalCap | [0, 1] | Reinforcement at outer side of wall. The outer side of the wall is defined as the edge of the wall at the intersection of the wall with the fuselage skin running along the main direction of the wall. |
| sheetElementUID | Reference to a sheet element definition specifying the physical properties of the wall's shell. |
Attributes| Name | Type | Required | Description |
|---|---|---|---|
 externalDataDirectory |  string | ||
| externalDataNodePath | string | ||
| externalFileName | string | ||
| uID | ID |
See Also