| sparCell Element |
Spar cell of the spar.
Namespace: Empty
Schema: Empty
Type
ParentsChildren| Name | Occurrences | Description |
|---|---|---|
 All | ||
 fromEta | Beginning (= inner border) of the spar cell. | |
| lowerCap | [0, 1] | Lower Cap |
| rotation | The angle between the wing middle plane and web 1 [deg]. Default is 90 degrees. Positive rotation is around the spar axis heading along with the positive eta-axis. | |
| toEta | Ending (= outer border) of the spar cell. | |
| upperCap | [0, 1] | Upper Cap |
| web1 | Web 1 | |
| web2 | [0, 1] | Web 2 |
Attributes| Name | Type | Required | Description |
|---|---|---|---|
 externalDataDirectory |  string | ||
| externalDataNodePath | string | ||
| externalFileName | string | ||
| uID | ID | Yes |
RemarksWithin spar cells a special area of the spar is defined where different cross section and material properties shall be defined.
The area of the spar is defined by using the parameters 'fromEta' and 'toEta'. The definition of the caps, webs and rotation is equivalent to the cross section definition of the complete spar.
See Also