| structuralMemberPosition Element |
Position
Namespace: Empty
Schema: Empty
Type
ParentsChildren| Name | Occurrences | Description |
|---|---|---|
 All | ||
 alignment | [0, 1] | Alignment |
| continuity | [0, 1] | Continuity definition for profile extrusion: 0= C0 (allows sharp edges, default), 2= C2 (defines curvature continuity) |
| interpolation | [0, 1] | Interpolation between different profiles: 0= no interpolation 1= interpolation of structural profile |
| positionX | [0, 1] | Absolute x position |
| positionXAngle | [0, 1] | Angle used to define the x position |
| positionXFact | [0, 1] | Factor used to define the x position |
| positionXoffset | [0, 1] | Offset applied to the x position |
| positionXUidEnd | [0, 1] | UID of the element defining the end of the x position range |
| positionXUidMax | [0, 1] | UID of the element defining the maximum x position |
| positionXUidMid | [0, 1] | UID of the element defining the middle x position |
| positionXUidMin | [0, 1] | UID of the element defining the minimum x position |
| positionXUidStart | [0, 1] | UID of the element defining the start of the x position range |
| structuralElementUID | [0, 1] | UID of the profile based structural element used for the member |
Attributes| Name | Type | Required | Description |
|---|---|---|---|
 externalDataDirectory |  string | Directory of the external data file | |
| externalDataNodePath | string | Path of the node inside the external data file | |
| externalFileName | string | Name of the external data file | |
| uID | ID | Yes | UID |
See Also