| controlSurfaceWingCutOutType Complex Type |
Cut out of the parents structure due to a control surface.
Namespace: Empty
Schema: Empty
Base Type
UsagesChildren| Name | Occurrences | Description |
|---|---|---|
 All | ||
 cutOutProfileControlPoint | [0, 1] | Control points of the cut out profile at the inner and outer border |
| cutOutProfiles | [0, 1] | Profiles describing the shape of the cut out |
| innerBorder | [0, 1] | Inner border |
| lowerSkin | Cut out in the lower skin of the parent structure | |
| outerBorder | [0, 1] | Outer border |
| upperSkin | Cut out in the upper skin of the parent structure |
Attributes| Name | Type | Required | Description |
|---|---|---|---|
 externalDataDirectory |  string | Directory of the external data file | |
| externalDataNodePath | string | Path of the node inside the external data file | |
| externalFileName | string | Name of the external data file |
RemarksOptional. Definition of the parents structure cut out due to a control surface. The cut out is split into three parts: cut out of the upper and lower skin and the definition of an profile connecting the cut out of the upper and lower skin.
An example for wing cut outs can be found in the picture below:
In the default configuration the cut out is as wide as the control surface. If additional spacing is necessary inner and outer border may be set.