| guideCurve Element |
Guide curve
Namespace: Empty
Schema: Empty
Type
ParentsChildren| Name | Occurrences | Description |
|---|---|---|
 Sequence | ||
 name | Name | |
| description | [0, 1] | Description |
| guideCurveProfileUID | Reference to a guide curve profile | |
 Choice | For the first segment fromGuideCurveUID is not a valid entry! For the first guideCurve fromRelativeCircumference must be applied! fromGuideCurveUID is exclusive. | |
| Sequence | ||
| fromGuideCurveUID | Reference to the previous guide curve from which this guide curve shall start | |
| continuity | [0, 1] | Continuity definition for geometry generation. Possible options: C0, C1 from previous, C2 from previous, C1 to previous, C2 to previous. |
| Sequence | ||
| Choice | ||
| fromParameter | Reference to the parameter position from which the guide curve shall start. Valid values are in the interval -1.0...1.0. | |
| fromRelativeCircumference | Reference to the relative circumference position from which the guide curve shall start. Valid values are in the interval -1.0...1.0. | |
| tangent | [0, 1] | Tangent at first point |
| Choice | ||
| toParameter | The parameter position at which the guide curve shall end. Valid values are in the interval -1.0...1.0. | |
| toRelativeCircumference | The relative circumference position at which the guide curve shall end. Valid values are in the interval -1.0,..,1.0. | |
| tangent | [0, 1] | Tangent at last point |
| rXDirection | [0, 1] | Local direction along which the relative x-coordinates of the guide curve points are defined. For the wing the default is the wing's local x-axis, for the fuselage its the fuselage's local z-axis. |
Attributes| Name | Type | Required | Description |
|---|---|---|---|
 externalDataDirectory |  string | Directory of the external data file | |
| externalDataNodePath | string | Path of the node inside the external data file | |
| externalFileName | string | Name of the external data file | |
| uID | ID | Yes | UID |
See Also