| wingFuselageAttachmentType Complex Type |
Definition of the wing-fuselage attachment
Namespace: Empty
Schema: Empty
Base Type
UsagesChildren| Name | Occurrences | Description |
|---|---|---|
 All | ||
 actuators | [0, 1] | Actuators (e.g. trim actuator of an HTP) of the attachment |
| attachmentPins | [0, 1] | Position, orientation, materials and blocked DOFs of attachment pins |
| rib1 | First (=inner) rib of the fuselage attachment | |
| rib2 | [0, 1] | Second (=outer) rib of the fuselage attachment. Optional. Only to be used if attachment is defined over two ribs. |
Attributes| Name | Type | Required | Description |
|---|---|---|---|
 externalDataDirectory |  string | Directory of the external data file | |
| externalDataNodePath | string | Path of the node inside the external data file | |
| externalFileName | string | Name of the external data file |
RemarksDefinition of the wing-fuselage attachment. The area of the fuselage attachment (resp. center wing box, CWB) is defined by defining one resp. two ribs from the rib definition. If one rib is defined (rib1) the CWB goes from the closer end of the componentSegment (e.g. wing symmetry plane) to the defined rib. If two ribs are defined (rib1 and rib2), the CWB is between both ribs.
Additionally attachment pins can be defined. At those positions the wing is attached to the fuselage. This can be e.g. used for defining the wing-attachment of high wing configurations, HTPs or VTPs.