fuselageCutOutType Complex Type |
fuselageCutOutType
Namespace: Empty
Schema: Empty
Name | Occurrences | Description |
---|---|---|
All | ||
alignmentVector | [0, 1] | Coordinates of the unit vector defining the y-axis of the local cutout coordinate system. Must be normal to the orientationVector. |
cutoutType | Cutout type. Determines the type of the cutout and how it is treated by the tools. Possible values: ("window"|"door"|"ramp") | |
deltaY | This value is used to define the width of the cutout | |
deltaY1 | [0, 1] | This value is used to define the width of the cutout |
deltaZ | This value is used to define the height of the cutout | |
deltaZ1 | [0, 1] | This value is used to define the height of the cutout |
description | [0, 1] | Description of the cutout |
filletRadius | Fillet radius of the cut element (absolute value) | |
name | [0, 1] | Name of the cutout |
orientationVector | Coordinates of the unit vector defining the direction of extrusion | |
positionX | X position of the cutout center point | |
referenceAngle | Angle in degrees of the vector pointing from the cutout reference point to the cutout center point, measured relative to the direction of the fuselage z axis. | |
referenceY | Y offset of the cutout reference point | |
referenceZ | Z offset of the cutout reference point |
Name | Type | Required | Description |
---|---|---|---|
externalDataDirectory | string | ||
externalDataNodePath | string | ||
externalFileName | string | ||
uID | ID | Yes |