missionSegmentEndConditionType Complex Type |
End condition
Namespace: Empty
Schema: Empty
Name | Occurrences | Description |
---|---|---|
Sequence | ||
Choice | [0, 1] | |
calibratedAirSpeed | Calibrated airspeed at the end of the segment [m/s] | |
machNumber | Mach number at the end of the segment | |
Choice | [0, 1] | |
positionGeo | Position at the end of the segment in geo coordinates | |
positionXYZ | Position at the end of the segment in xyz coordinates | |
runway | Reference to the runway on which the segment ends | |
Choice | [0, 1] | |
fuelConsumed | Consumed fuel ending the segment [kg] | |
fuelFraction | massFraction of remaining fuel ending the segment [-] | |
fuelRemaining | Absolute mass of remaining fuel ending the segment [kg] | |
massFraction | massFraction ending the segment [-] | |
powerConsumed | Consumed power ending the segment [W] | |
powerFraction | Power fraction of remaining at the end of the segment | |
powerRemaining | Absolute power left ending the segment [W] | |
Choice | [0, 1] | |
heading | Flight heading at the end of the segment in compassAngle with reference to true North [deg] | |
turnAngle | Total change of heading angle during segment (a full turn is 360 degrees) [deg] | |
range | [0, 1] | Flown distance ending the segment |
Choice | ||
duration | [0, 1] | Duration of the segment [hh:mm:ss] |
endTimeUTC | [0, 1] | UTC time at end of segment [hh:mm:ss] |
specificExcessPower | [0, 1] | Specific excess power at the end of the segment |
rateOfClimb | [0, 1] | Rate of climb ending the segment [m/s] |
flightPathAngle | [0, 1] | Achieved flightPathAngle ending the segment [deg] |
releasedStores | [0, 1] | List of stores released in the segment. The corresponding weightAndBalance vector for retrieving the new state as well as a potential change in aerodynamicPerformanceMap (if external stores are released) should be reflected within the configuration node at model level. |
Name | Type | Required | Description |
---|---|---|---|
externalDataDirectory | string | ||
externalDataNodePath | string | ||
externalFileName | string |