generalStructuralMemberPositionType

The x-coordinate of the position is given either directly by <positionX> or from other elements by <positionXUidStart>, <positionXUidEnd>, <positionXUidMin>, <positionXUidMid>, <positionXUidMax>, <positionXAngle>, <positionXFact> and <positionXoffset>. How these combine, and where the position lies across the fuselage, is not specified yet.

Attributes

Name	Type	Use	Description
`@externalDataDirectory`	`xsd:string`	optional	Directory of the external file the element was read from, as URI
`@externalDataNodePath`	`xsd:string`	optional	Path of the parent element in the merged dataset, at which the element was inserted from an external file
`@externalFileName`	`xsd:string`	optional	Name of the external file the element was read from
`@uID`	`xsd:ID`	required	UID

Child elements

Name	Type	Constraints	OccurrenceHow often the element may appear at this place. The schema writes it as minOccurs and maxOccurs on the declaration.	Default	Description
allThe children below may appear in any order. Each may appear at most once.
`structuralElementUID`	`stringUIDBaseType`		[0..1] optional		UID of the profile based structural element used for the member
`positionX`	`doubleBaseType`		[0..1] optional		X-coordinate [m]
`positionXUidStart`	`stringUIDBaseType`		[0..1] optional		UID of the element defining the start of the x position range
`positionXUidEnd`	`stringUIDBaseType`		[0..1] optional		UID of the element defining the end of the x position range
`positionXUidMin`	`stringUIDBaseType`		[0..1] optional		UID of the element defining the minimum x position
`positionXUidMid`	`stringUIDBaseType`		[0..1] optional		UID of the element defining the middle x position
`positionXUidMax`	`stringUIDBaseType`		[0..1] optional		UID of the element defining the maximum x position
`positionXAngle`	`doubleBaseType`		[0..1] optional		Angle used to define the x position
`positionXFact`	`doubleBaseType`		[0..1] optional		Factor used to define the x position
`positionXoffset`	`doubleBaseType`		[0..1] optional		Offset applied to the x position
`alignment`	`alignmentStringFrameType`		[0..1] optional		Alignment
`continuity`	`integerBaseType`	2 values	[0..1] optional	`0`	Continuity definition for profile extrusion: 0= C0 (allows sharp edges, default), 2= C2 (defines curvature continuity)
`interpolation`	`integerBaseType`	2 values	[0..1] optional	`0`	Interpolation between different profiles: 0= no interpolation 1= interpolation of structural profile

Type	Name
`generalStructuralMemberType`	`standardMemberPosition`
`generalStructuralMemberType`	`structuralMemberPosition`

generalStructuralMemberPositionType

Attributes

Child elements

Used by

In a dataset · 4 paths

In the schema · 2 declarations